Electrical Qualification in Just 4 Days!

Maximize Your Workforce

Fundamentals in Electrical Maintenance class training

 

Electrical Maintenance Training classes in Cleveland, Ohio. Electrical Tech Skills

Save valuable time and money with qualified technicians

With ETS’ Fundamentals of Electrical Maintenance training, your technicians will develop the skills necessary to effectively troubleshoot and safely repair the plant’s equipment as needed.

This reduces the need for costly part replacements, minimizes the need for technical support, and prevents equipment damage due to incorrect installation or substandard workmanship.

Conveniently located at WORKhub99 on Brookpark Road in Cleveland, Ohio.

Who should attend Fundamentals of Electrical Maintenance training?

  • Experienced electricians who need to sharpen their skills or gain new knowledge.
  • Electricians that are new to the craft or are transitioning from the construction trade to an industrial setting.
  • Multi-craft workers who need to develop the skills to perform electrical trouble shooting and repair accurately and safely.
ETC electrical maintenance classes are held in Cleveland, Ohio
Electrical Technical Skills training

Fundamentals of Electrical Maintenance

Class format

This is a 4-day course that consists of classroom and hands-on electrical maintenance training including safe electrical work practices. When the course is complete, the students will be able to perform fundamental electrical maintenance troubleshooting and repair tasks safely and accurately.

Class size

Up to 10 students can be trained at our location in each class. A company may reserve an entire class, or send individuals to our public classes. Click below for a detailed class outline.

Each training day runs from 8am – 4pm.

 

Course modules/details

Module 1: Basic Electrical Theory

The lesson material will be a combination of classroom lecture and hands-on exercises that start with electrical basic theory and finish with more advanced troubleshooting concepts. The students will use breadboards to

build circuits, take volt, ohm and current measurements that will verify their previously calculated values. At the completion of this module the student will be able to identify common circuit malfunctions such as opens and shorts utilizing test instruments.

Understand Basic Electrical Concepts

• Basic atomic structure

• Direct Current (DC)

  Alternating Current (AC)

  Volts / Ohms / Amps

• Insulators / Conductors

• Ohm’s law

• Circuit Construction

• Basic Troubleshooting Techniques

Use and Limitations of Test Equipment

  Volt Meters

• Ohm Meters

  Amp Meters

Module 2: Alternating Current

At the completion of this module, the student will understand what alternating current is, how it works, and what factors affect the operation and maintenance of AC equipment such as motors, transformers, and distribution equipment.

Learning Outcomes

• Describe single and three-phase alternating current

• Understand how alternating current is generated

• Explain the principals of electromagnetism

• Explain how current flow and polarity change in AC circuits

• Explain what frequency is and how it is measured

• Define peak value, peak-to-peak value, and effective value with respect to AC voltage and current

• Explain the difference between single-phase and three-phase AC systems

• Explain how a three-wire single-phase AC system supplies two different voltages

• Differentiate between delta-connected and wye-connected three-phase AC systems

• Calculate line and phase voltage

Module 3: Transformers

Electric transformers are utilized in most electrical equipment. Transformers can either step-up or down voltages to provide a safer level for equipment controls that will be interacted with by plant employees. Even though

transformers do not contain any moving parts they can fail due to improper maintenance or overloading. This module will explain how a transformer operates, how to determine the correct size, and identify common malfunctions.

Learning Outcomes

• Explain how a transformer operates

• Identify common uses of transformers

• Describe the components that make-up a transformer

• Determine the turns ratio of a transformer

• Compare and contrast three-phase and single-phase transformers

• Read transformer nameplate information

• Explain transformer wye and delta configurations

• Calculate phase and line voltages

• Determine transformer sizing based on load

• Calculate short circuit current

• Discuss transformer malfunctions

Module 4: Electrical Motor Operation and Troubleshooting

This module starts with the basics of electric motors and control techniques thorough fundamental motor maintenance and identification of common electric motor failures. This module will have the students building and troubleshooting both basic and specialized motor control circuits, as well as, wiring three-phase electric motors for both high and low voltage based on the information they glean from the motor’s nameplate. The students will learn how to identify shorted and open windings by using test equipment such as volt/ohm meters and insulation resistance testers.

Learning Outcomes

• Identify the parts of an electric motor

• Explain the operation of a synchronous electric motor

• Given name plate data properly connect a three-phase electric motor

• Using test equipment identify the cause of a malfunctioning electric

motor

• Troubleshoot open and shorted motor windings

• Clean, inspect, and repair a NEMA rated motor starter

Module 5: Motor Control Wiring and Troubleshooting

This module provides the student with the necessary understanding of motor control devices such as limit switches, motor starters, and relays and their symbols used on electrical diagrams.

Students will build common motor control stop and start circuits using real world equipment from ladder diagrams. Troubleshooting techniques will be explained and performed as part of this intensely hands-on module.

Learning Outcomes

• Identify electrical components and their symbols on electrical drawings

• Read a ladder diagram and explain the operation logic

  • Explain the operation of relays
  • Build a 3-wire motor control circuit
  • Perform basic troubleshooting of motor control circuits using test equipment
  • Interpret a common MCC bucket wiring diagram

Module 6: Over Current Protection

Over Currents Protection Devices protect equipment and conductors by opening the circuit when predetermined values or parameters are met.

Over current protection devices include fuses, circuit breakers and thermal overloads. In this module, the student will learn the different types of fuses and circuit breakers, how they operate and how they protect circuits from both short circuit and overload conditions.

Learning Outcomes

• Compare and contrast a short circuit, overload, and ground fault

• Explain fuse current, voltage, and interrupt ratings

• Discuss current limiting fuse operation

• Explain rejection type fuse holders and fuses

• Explain the operation of single and dual element fuses

• Identify the components of low voltage circuit breakers

• Discuss the operation of low voltage circuit breakers

• Explain how thermal overloads operate

Module 7: Components for Electrical Construction

Industrial Electricians need a basic understanding of the National Electric Code to ensure that safety requirements are met when installing new or replacing old equipment. In this module, the student will learn the different wire types, their ampacities and how many conductors can safely be installed in conduits. Wire splicing methods will be discussed such as the safe use of twist-on connectors.

Learning Outcomes

  • Compare and contrast wires and cables
  • Determine a wire size base on American Wire Gauge Standards
  • Determine the Ampacity of a wire in accordance with the National Electric Code
  • Identify the different insulations used on common industrial wires
  • Compare and contrast copper and aluminum wires
  • Determine the number of wires that can be safely joined using a twist on connector

Module 8: Variable Frequency Drive Operation and Troubleshooting

A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor.

In this module, the student will learn how a VFD operates, how to install inputs and output for proper operation, program various parameters, and troubleshoot malfunctions by retrieving and deciphering fault codes. This is a hands-on module in which the students will install, program, operate and troubleshoot real world VFD applications.

Learning Outcomes

• Explain the basic theory and applications of Variable Frequency Drives

• Explain Internal operation of a VFD

• Describe the Installation and maintenance requirements

• Perform installation of real-world field I/O controls

• Explain 0-10v & 5-20ma signal generation and input

• Perform VFD basic Programming

• Identify parameters and settings

• Troubleshooting the VFD and Field I/O

Fundamentals of Electrical Maintenance program overview

Unlock the Power of Expert Electrical Maintenance: Get Your FREE Comprehensive PDF!

Are you ready to empower your technicians with the essential skills for efficient electrical maintenance? Discover our FREE PDF, an in-depth outline of “The Fundamentals of Electrical Maintenance” course’s 9 enriching modules.

This dynamic overview will be immediately delivered to the email address you provide.

Hidden

Next Steps: Sync an Email Add-On

To get the most out of your form, we suggest that you sync this form with an email add-on. To learn more about your email add-on options, visit the following page (https://www.gravityforms.com/the-8-best-email-plugins-for-wordpress-in-2020/). Important: Delete this tip before you publish the form.
Name(Required)
Email(Required)
This field is for validation purposes and should be left unchanged.

Backed by the seasoned professionals at ETS, this course is meticulously designed to cultivate safe and technically proficient technicians. As leaders in electrical training, we’re committed to enhancing your team’s capabilities.

Available Classes

Sign up before they fill up!

Note: Each training day runs from 8am – 4pm

FUNDAMENTALS
OF ELECTRICAL MAINTENANCE

Oct 21-24, 2024

Electrical Technical Skills training, Cleveland, ohio

FUNDAMENTALS
OF ELECTRICAL MAINTENANCE

Nov 18-21, 2024

Electrical Technical Skills training, Cleveland, ohio

FUNDAMENTALS
OF ELECTRICAL MAINTENANCE

Dec 16-19, 2024

Electrical Technical Skills training, Cleveland, ohio

What they’re saying about our Fundamentals of Electrical Maintenance Class

Chris Farr

“Really enjoyed the class lot of good information in reference material in this class”

Bryan Williams

“I learned more than I expected to in this class. The instructor was very patient and easy to understand. I definitely would recommend this class if you need to touch up on your electrical skills or just need to learn more about electrical.”

Robert Gushura

“I really appreciated the class and learned quite a bit more then I knew, especially about 3 phase. The hands on really helped with reading schematics and trying to figure out what went where and how to wire it correctly.

I already found several issues at work that we don’t do correctly and brought it up to the safety administration

Thank you for everything”

 

Questions?

Fill out the form below, or call
216-626-5948

Contact

Name(Required)
Note that ETS only trains company employees at this time.
This field is for validation purposes and should be left unchanged.

Latest Electrical Maintenance Article